[. . . ] ¡ Reset button (located on the front side of the unit hidden by the front panel) 5 !Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. You can detach the front panel of this unit to prevent the unit from being stolen. [. . . ] If only a few stations are received, some number buttons will retain their former setting. ⷠWhen a number is indicated in the display, the unit starts storing stations from the one currently displayed. Push the (SEEK/AMS) control up or down momentarily to search for the station (Automatic Tuning). Push the (SEEK/AMS) control up or down repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "Local" (local seek mode) is displayed. Then press (4) (n) to select "on" Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, push the (SEEK/AMS) control up or down and hold until the desired frequency appears (manual tuning). Press (SHIFT), then press (3) (PLAY MODE) repeatedly until "Mono" appears. If you want to put a blank space between characters, select "_" (underbar). To go back to the normal mode, select "Mono off" in step 2 above. Each time you press (DSPL), the item changes as follows: 3 Repeat steps 1 and 2 to enter the entire name. ⷠThe disc or track name appears depending on the setting when you press (SOURCE) to select an MD. Press (MODE) until the desired unit appears (for example: CD2 or CD3). If you press (DSPL) to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off. When a CD or MD unit is connected, all the tracks play from the beginning. Each time you press (DSPL) during CD/MD playback, the item changes as follows: During playback, push the (SEEK/AMS) control up or down once for each track you want to skip. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. Tip If the name of the MD is too long, you can scroll it across the display window by pressing (SHIFT), then (1) (N). To search forward To search backward You can play the first 10 seconds of all the tracks on the currently selected disc. Playing tracks in random order -- Shuffle Play Shuf All to play all the tracks in random order (for CD unit(s) only). During playback, press (SHIFT), then press (3) (PLAY MODE) repeatedly until "Intro" appears. To go back to the normal playback mode, select "Intro off" in step 2 above. [. . . ] To load the disc, first press the number button, then choose the disc that has not been loaded. There are also some letters which cannot be displayed (during MD playback). Playing the specified tracks only you can select: · Bank on to play the tracks with the "Play" setting. ⷠBank inv (Inverse) to play the tracks with the "Skip" setting. [. . . ]